Maybe I am an idiot and have done something obviously wrong. I have as part of my debugging process updated both the CHR and ROS 7 site to 7.8 but did not see any noticeable changes for OSPF anyway this issue is simply the site and the CHR host are not seeing eachother as a neighbour anymore. I dont have the time to setup another CHR with ROS 7 to see if it will work on OSPF or not. why should I use RIP when OSPF worked fine just 24 hours ago with no config changes? RIP works fine (without even using static neighbours so.) which is my current "solution" one site on RIP the other on OSPF. ROS 7 has made me despise routing in Mikrotik because its so freaking unstable. both sites are showing in interfaces so its listening but not getting anything) /routing ospf instanceĪdd disabled=no name=ospf out-filter-chain=onl圜lassC redistribute=connected,ospf,vpn router-id=id-1Īdd area=backbone disabled=no interfaces=S2SVPN networks=10.70.0.0/24 type=ptp This config worked 24 hours ago /routing ospf instanceĪdd disabled=no name=ospf originate-default=never out-filter-chain=onl圜lassC \Īdd disabled=no instance=ospf name=backboneĪdd area=backbone disabled=no instance-id=1 networks=10.70.0.0/24 type=ptpĬHR ( I doubt the issue is here. Set redistribute-connected=as-type-2 router-id=10.0.0.1Īdd cost=1000 disabled=yes interface=L2TP network-type=point-to-point and fully reconfigured OSPF and yet the only site that works is ROS 6 (before Mikrotik made OSPF just complete garbage) the firewall is unlikely to be my issue here correct? Static routes work so its purely OSPF thats taken a dump. and the routers at both sites also allow from the CHR. The firewall on the CHR explicitly allows the VPN IP's that are being used.
but the interface is showing as up and the logs show that it is sending HELLO packets It does not show up in the neighbours tab or anything.
With zero changes to any router the OSPF on this site has stopped working. The other site is also running ROS 7.7 which up until today has worked fine also with OSPF over the L2TP So heres the setup I have a CHR running 7.7 in the cloud which is hosting L2TP/IPSec and also OSPF
0 kommentar(er)
